Build your RSD Cafe Sportster
 
Want to quickly transform your sportster into an aggressive yet comfortable cafe racer? The RSD line of Cafe products will do just that. Check out below for some suggested items that will dramatically change the look of your bike.
 
Build your RSD Cafe Sportster

The RSD Café Tail Section slims and simplifies the back of your Sportster. The Tail is made of thick, strong fiberglass that is covered with a Black Gel Coat. Sold separately are two different seat options, the simple clean lines of the Café style, or the triple diamond stitched Boss. The RSD Café Tail package is aggressive, yet flows perfectly with the Sportster side covers and gas tank. If you don't want to cut the struts off of your bike, check out our line of Cafe Sportster seats that works with your stock fender and struts!
 
Build your RSD Cafe Sportster
 
Our racetrack driven RSD Rearsets for Sportsters are the ultimate improvement for an aggressive foot position. These Rearsets have RSD’s high quality finish and feature foot pegs with race style pivots allowing for a higher lean angle. The mega knurl on our pegs ensure your feet stay planted and your focus remains on the road ahead. High quality fasteners and pivots ensure smooth operation with little effort. 
 
Build your RSD Cafe Sportster
 
The RSD 1" Clip-Ons mount to 39mm, 41mm or 49mm front forks, below the top triple clamp, for a low handlebar position. The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings. When installing Clip Ons we use Misano race styled Riser Hole Plugs to clean up the holes in the top of your stock triple clamp.
 
Build your RSD Cafe Sportster
 
The Cafe Gauge and Headlight Re-locator lowers your headlight and gauges to a more sleek position from the top handlebar clamp down to the front of the top triple clamp and lowers the stock headlight 2 inches. This allows for the use of any aftermarket risers or complete elimination of risers for use of the RSD Cafe 39mm Clip-Ons.
 
The options are endless with our multiple finishes, cafe accessories and other sportster fitting products. Keep it simple and easy on the budget with just the a few pieces or go all out with the full line. The choice is yours, just have fun with it. Scroll down to see what these parts can really do.
 
Build your RSD Cafe Sportster
 
Here we took a stock 2008 Sportster and did a live install at our shop in Los Alamitos. View install blog here! We installed the following parts in about 4 hours: Slant 2 into one exhaust in the Carbon Ops Finish (1800-1561), Slant Carbon Fiber Intake Kit (1010-1248), Fork Preload Adjusters in Contrast Cut (0414-0446), Misano Steering Stem Bolt in Contrast Cut (0410-0187), Chrono Headlight Bezel in Contrast Cut (2001-0793), Chrono Grips-Black Ops(0630-1016), Solo Seat Sportster Avenger (0804-0438), Misano Gas Cap-Contrast Cut (0703-0591).
 
Build your RSD Cafe Sportster
 
The International Motorcycle Group Hamsters USA sponsored a raffle of this Harley-Davidson “Nightster” to benefit Children’s Care in Rapid City. Built with RSD/Mustang - Cafe Seat , Narrowglide Forkbrace, Nostalgia Velocity Stack, Tracker 2-into-1 by V&H, Nostalgia Ignition Cover, RSD Front Master Cylinder Cap, RSD Moto Pegs, RSD 39mm Clip-ons, RSD Tracker Grips, RSD Cafe Guage and Headlight Relocator, Painter: DannyD
 
RSD Drag 48
Build your RSD Cafe Sportster
 
This bike was built for Drag Specialties to showcase our products and show how versatile the Sportster can be. Click here for more information.
 
Build your RSD Cafe Sportster
 
It was an honor to work with Panasonic and the iconic Technics brand as inspiration for our 883 Iron Project. For the Technics inspired build we took cues from the DH1-1200 Headphones as well as the classic SL-1200MK2 Professional turntables. View blog
 
Build your RSD Cafe Sportster
 
Here's our shop sportster taking another twist with its latest update.  View Blog. View techsheet



Copyright © 2016 Roland Sands Design, Inc. All Rights Reserved - Motorsport Aftermarket Group